AirLink SkyIPCam310 Manual do Utilizador

SkyIPCam310 Power Over Ethernet Network Camera Model # AICP310 User’s Manual Ver 1A

92.4 Setting up the Camera Installing the Setup Wizard Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Click on I

10 Step 4 Click Yes to accept the License Agreement. Step 5 Click Next to accept the default Destination Folder. Step 6 Click Finish to complet

11 Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard > AirLink101 IP Camera Setup Wizard

12 Step 3 If the Camera’s default IP address is on a different subnet, the following message will appear. Click Yes to continue. If you do not rece

13Step 5 The Wizard will automatically generate an IP address for the camera, if this address is not in use by any other device in your local network

14 Step 8 Verify that all the fields are correct and click Restart to save the settings and reboot the camera. Viewing Images Step 1 At the Se

15 Step 2 Enter the username and password for the network camera. The default username and password are both “admin”. Step 3 The web based vi

16 Step 4 If you select ActiveX Mode, you may be prompt to install the ActiveX Control. Click on the yellow bar to on the top of the screen and clic

17Step 6 You can focus the camera by turning the camera’s lens clockwise or counter-clockwise. Note: ActiveX and/or Java Applet must be installed

18and "Admin Password" when you are the first time to use the SkyIPCam310. Once the ID and Password are defined, only the administrator has

1Table of Contents ABOUT THIS GUIDE...

19 SOHOInternet CameraSOHO WirelessInternet CameraHome Applications Diagram SOHOSOHO Applications D

208 5. Using the Camera You can access and manage the SkyIPCam310 through: 1) a web browser, and 2) the enclosed software IPView Pro. This chapter d

21Click System Administration to prompt a login dialog window, and type the default username/ password (admin/admin) in the corresponding boxes. The

22 Date & Time - Server’s Time: Display the current date/time settings of the camera. - TimeZone: Select the time zone for the region from the p

23 Environment Select Outdoor or Indoor according to the installation location of the camera. Light Frequency Select 60HZ or 50HZ. Video Resoluti

24 - Brightness: Adjust the brightness level ranging from -64 to +64. - Saturation: Adjust the colors level ranging from -64 to +64. - Contrast: Ad

25 IP Assignment - Use Static IP Address: You can select this option and enter the IP address directly. The default settings are: • IP Address – 19

26 Administrator This field is used for entering the administrator password to access the settings. Enter the password in the Admin Password box, an

27Trigger The Trigger window contains the control settings for external device through the I/O port, and the settings required for e-mail. Enable

28Access Control Click the Access Control button to bring up a dialog window that contains list of users, allowing the administrator to assign legal

20 About This Guide This manual provides instructions and illustrations on how to use your SkyIPCam310 PoE Network Camera, includes: z Chapter 1, In

29- Directory Path: Enter an existing folder name in this field, and the images will be uploaded to the given folder. Operation To enable the FTP up

30 Check the Enable item to enable the function of your camera, and configure the related settings in the following fields. NOTE: When RS485 functi

31Information The Information window provides general information of the camera, including the Model name, Firmware Version, Mac Address, and IP Addr

32Reboot Do you really want to reboot this device? Click YES from this option, and you can restart the camera just like turning the device off and on

33 Camera Name/Location: The Camera name and location will be displayed when the Camera Name/Location fields are entered in the Web Configuration Uti

34When you select Popular protocol command setting in RS485 configuration window (see page37), you can use the Preset Position pull-down menu to sele

35 The function of these control buttons are the same as they are in ActiveX mode screen (see page 44).

369 6. IPView Pro This chapter describes IPView Pro, which is a powerful software application designed with a user-friendly interface for ease of co

37 Step 3 Read and accept the License Agreement; then, click Yes. Step 4 Choose the destination location. If no specific requirement, leave the

38 Step 6 Click Finish to complete the installation.

31 1. Introduction Thank you for purchasing the SkyIPCam310 PoE Network Camera, a camera device that can be connected directly to an Ethernet or Fas

396.2 Getting Started This section describes the User Interface of IPView Pro, with detailed procedures for using the application. To launch IPView

405 Rotate image angle Click to rotate the image shown in the View Window. 6 Snapshot Click to capture a still image from the View Window. 7 Audio ON

416.3 Using IPView Pro Adding a Camera To add a camera: 1. Click the System Configuration button to enter the System Configuration. If you are no

42 3. Click Save, and then click the System Configuration button to return to View Window. The selected camera’s video will be displayed now. You can

43 Viewing a Camera From the View Modes of the panel, you can select one-camera mode or other modes to display your video. IPView Pro allows a ma

44 Playing Recorded Video The recorded video clips are saved in your computer, and can be played using Windows Media Player. To start playback, simpl

45 Camera Configuration In this field, you can add/delete the camera (as described in the previous section). Also, you can configure the following se

46 - Detect Region: • Full picture – When you select this option, the camera will monitor the whole area. • Custom region – Click Add Region, a

47 - Invoke Alarm: Select this option to enable alarm when some motion detected by the system. - Send e-mail: When this option is checked, click th

48- Factory Reset: Restore the factory default settings of the camera. Do you really want to factory reset this device? Click Yes in the pop-up dial

4needs. When the external device is connected, you could configure the settings and control the device from the RS485 window of Web Configuration Uti

49 Recording Configuration In this field, you can configure the storage settings. - Log Storage: • Reserved HDD Space For MS-Windows OS – You

50folder; click Delete to remove a selected path setting. Please note that you are not allowed to delete a path setting if there is only one setting

51 - Week Mode: First, select the camera desired from the pull-down menu. Then, setup the time in the Start/Stop fields, and select the weekday from

52Log List This filed displays the user(s) information, which include the Date, MAC address, and the brief description of events. Account This

53About This filed provides information of the software application.

5410 7. Appendix 7.1 Frequently Asked Questions SkyIPCam310 Features Q: What is a Network Camera? A: The Network Camera (Internet Camera) is a sta

55Therefore, it is necessary to open port 8481 of the network for remote users to access the camera. 7.2 PING Your IP Address The PING (Packet In

56Q: Why does the Power LED not light up constantly? A: The power supply used might be at fault. Confirm that you are using the provided power suppl

57 7.4 Adjust SkyIPCam310 Focus To adjust the focus of the lens, you need to turn the lens slowly in either clockwise or anti-clockwise direction u

587.5 I/O Terminal Application Typically used in association with programming scripts for developing applications for motion detection, event trigg

51.3 System Requirements Networking  10Base-T Ethernet or 100Base-TX Fast Ethernet. Accessing the Camera For Web Browser Users  Operating Syste

59 1 2 PTZ Camera

607.6 Specifications Video specification Resolution: 640 x 480 pixel Sensor: Color CMOS sensor Lens: f: 6.0 mm, F: 1.8 Gain control: Automatic

61Operating environment Operating temperature: 5OC ~ 40OC Storage temperature: -25OC ~ 50OC Humidity: 5% ~ 95%, non-condensing EMI FCC and

6211 12 13 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com

63. Internal MIC The built-in omni-directional microphone allows the camera to receive sound and voice. Rear Panel 1. Network Cable Connec

7 Top/Bottom Panel Top Panel Bottom Panel Screw Hole Located on the top/bottom panel of the camera, the screw hole is used to connect the

82 2. Hardware Installation 2.1 Attaching the Camera to the Stand The SkyIPCam310 comes with a camera stand (optional), which is equipped with a s